b) For A 2000: A>70°.
A
3. Make sure that the angle is correct.
4. If the angle is not correct, tighten the adjustment
screw (A) to adjust the Toggle fastener.
A
C
B
5. Push all Toggle fasteners to locked position (C).
6. Make sure that the filter frame is fully closed.
7. Tighten the lock screws (B).
To clean the product
WARNING:
Stop the product and
disconnect the power cord from the wall
outlet.
WARNING:
Dust can come out in
the air when cleaning the product. Use
personal safety equipment, refer to
protective equipment on page 12
.
• Do not clean the product with a high-pressure
washer or compressed air.
• Clean the external surface with a moist cloth.
• Do not use water on electrical components.
• The HEPA filter cannot be cleaned and must be
replaced when full.
• After maintenance, put discarded parts in plastic
bags. Refer to local regulations for the correct
procedure.
• If you use water to clean the product, remove the
prefilter before you clean. Also make sure that no
water goes into the HEPA filter.
14
923 - 001 - 27.04.2022
Summary of Contents for A 1000
Page 35: ...923 001 27 04 2022 35 ...