manualshive.com logo in svg

Husqvarna 966951101, Operator'S Manual

The Husqvarna 966951101 Operator’s Manual With Parts Listing provides comprehensive information for operating and maintaining your Husqvarna product. This essential manual is available for free download on our website, ensuring easy access and hassle-free ownership. Get the most out of your equipment with the help of this user-friendly manual.

Share
Download
background image

13

Edger-trimmers  stored  for  any  length  of  time  should  be  completely  drained  of  fuel  to  prevent 

gum  deposits  forming  on  essential  parts  such  as  the  carburetor  and  fuel  tank.  Such  deposits 

may  affect  the  operation  of  the  engine  when  used  again.  Therefore,  it  is  important  that  the 

following  instructions  be  adhered  to  before  starting  engine.  1.  Drain  fuel  tank  completely.  2. 

Operate  the  engine  until  it  stops  from  lack  of  fuel,  to  clean  all  gasoline  out  of  carburetor.  3. 

While  engine  is  still  warm,  drain  the  crank  case.  Refill  with  fresh  oil.  4.  Remove  spark  plug,  and 

pour  one  ounce  of  oil  into  the  cylinder.  Pull  starter  rope  on  the  engine  to  spread  the  oil.  Replace 

spark  plug.  5.  Clean  dirt  and  chaff  from  cylinder  and  cylinder  head  fins,  blower  housing,  etc.

MAINTENANCE NOTES

STORAGE INSTRUCTIONS

Summary of Contents for 966951101

















Reviews:

No comments

Related manuals for 966951101

Echo PE-2000 Type 1/1E Operator'S Manual preview
PE-2000 Type 1/1E
Brand: Echo Pages: 28
Echo PE-230 Operator'S Manual preview
PE-230
Brand: Echo Pages: 36
Southland Edger King S-WLE-1639 Operator'S Manual preview
Edger King S-WLE-1639
Brand: Southland Pages: 23

Brands by name

Popular brands

Load more brands