Husqvarna 701 Supermoto 2016, Owner'S Manual, Page: 153 / 216

15 ELECTRICAL SYSTEM
151
15.11 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance

under the first mark.
Guideline
Distance
 5 cm (2 in)
–
Position the vehicle vertically at a distance  away from the wall.
Guideline
Distance

5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. ( p. 151)
15.12 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 151)