Husqvarna 701 Supermoto 2016, Owner'S Manual, Page: 178 / 216

21 TROUBLESHOOTING
176
Faults Possible cause Action
The engine does not turn when the
starter button is pressed
Operating error
–
Carry out the start procedure. ( p. 57)
The battery is discharged
–
Recharge the battery. ( p. 137)
–
Check the quiescent current.
Fuse
1
or
2
blown
–
Change the fuses of individual power
consumers. ( p. 143)
–
Set the clock. ( p. 47)
Main fuse burned out
–
Change the main fuse. ( p. 140)
No ground connection present
–
Check the ground connection.
Engine turns only if the clutch lever is
drawn
The vehicle is in gear
–
Shift gear to neutral.
The vehicle is in gear and the side
stand is folded out
–
Shift gear to neutral.
The engine turns but does not start Operating error
–
Carry out the start procedure. ( p. 57)
Fuse 3 blown
–
Change the fuses of individual power
consumers. ( p. 143)
The plug-in connection of the fuel
hose connection is not connected
–
Connect the plug-in connection of the fuel line.
Defect in fuel injection system
–
Read out the fault memory using the Husqvarna
Motorcycles diagnostics tool.
Throttle opened while starting
–
When starting, DO NOT open the throttle
–
Carry out the start procedure. ( p. 57)
Engine has too little power Air filter is very dirty
–
Remove the air filter. ( p. 93)
–
Install the air filter. ( p. 94)
Fuel screen is very dirty
–
Change fuel screen.
Fuel filter is very dirty
–
Check the fuel pressure.