English – 39
TECHNICAL DATA
Bar and chain combinations
The following recommended combinations of bar and saw chain are type approved for your chain saw.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB
, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws
Husqvarna 570 and 576XP
from 2008’s serial numbers and onwards (the year is clearly stated in plain text on the
type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of June 22, 1998 ”relating to machinery”
98/37/EC
, annex IIA.
- of December 15, 2004 ”relating to electromagnetic compatibility”
2004/108/EC
.
- of May 8, 2000 ”relating to the noise emissions in the environment”
2000/14/EC
.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2001, EN ISO 11681-1:2004
Notified body:
0404, SMP Svensk Maskinprovning AB
, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for
EC type examination in accordance with annex VI, have the numbers: 404/05/1059
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/055
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 4 April 2008
Bengt Frögelius, Development director chainsaw R&D
Bar
Chain
Length, inch
Pitch, inch
Gauge, mm
Max. nose radius
Type
Length, drive links (no.)
15
3/8
1,5
11T
Husqvarna H42
56
16
3/8
1,5
60
18
3/8
1,5
68
20
3/8
1,5
72
24
3/8
1,5
84
28
3/8
1,5
92
