Husqvarna 536LiHE3 Operator'S Manual Download Page 15

WORKING TECHNIQUES

English

 –

 15

General working instructions

Basic safety rules

Wear personal protective equipment. See instructions 
under the ”Personal protective equipment” heading.

Never allow children to use or be in the vicinity of the 
machine.

Observe your surroundings and make sure that there 
is no risk of people or animals coming into contact 
with the cutting equipment.

Never allow anyone else to use the machine without 
first ensuring that they have read and understood the 
contents of the operator’s manual.

Inspect the working area. Remove any objects that 
could be thrown out.

Never work from a ladder, stool or any other raised 
position that is not fully secured.

CAUTION! Do not use the machine unless you are 
able to call for help in the event of an accident. Ensure 

that no-one comes closer than 15 metres while you 
are working.

Never use the machine in bad weather, for instance in 
fog, in rain, strong winds, intense cold, etc.

If any foreign object is hit or if vibrations occur stop the 
machine immediately. Remove the battery from the 
machine and check that the machine is not damaged.

SavE mode

The machine is equipped with a battery saving function 
(SavE). Activate the function by pressing the SavE button. 
A green LED will light to indicate that the function is on.

Automatic switch off functionality

The machine is equipped with a shutdown feature that 
deactivates the machine if not used. The green LED will 
be extinguished and the machine turned off after 45 
seconds.

Safety instructions while working

Do not overreach. Keep proper footing and balance at 
all times.

Never put the machine down without turning it off first 
and always remove the battery.

Use the harness to support the weight of the machine 
and make it easier to handle.

IMPORTANT!

This section takes up the basic safety precautions for 
working with a hedge trimmer.

If you encounter a situation where you are uncertain 
how to proceed you should ask an expert. Contact your 
dealer or your service workshop.

Avoid all usage which you consider to be beyond your 
capability.

!

WARNING! The machine can cause 
serious personal injury. Read the safety 
instructions carefully. Learn how to use 
the machine.

!

WARNING! Cutting tool. Do not touch the 
tool without first switching off the 
engine. Always remove the battery 
before any maintenance on the machine.

!

WARNING! Watch out for thrown objects. 
Always wear approved eye protection. 
Never lean over the cutting attachment 
guard. Stones, rubbish, etc. can be 
thrown up into the eyes causing 
blindness or serious injury.

Keep unauthorised persons at a 
distance. Children, animals, onlookers 
and helpers should be kept outside the 
safety zone of 15 metres. Stop the 
machine immediately if anyone 
approaches. Never swing the machine 
around without first checking behind you 
to make sure no-one is within the safety 
zone.

Summary of Contents for 536LiHE3

























Reviews: