background image

GENERAL SAFETY PRECAUTIONS

10 – English

Battery safety

The rechargeable Husqvarna batteries, BLi, are 
exclusively used as a power supply for the relevant 
Husqvarna cordless appliances. To avoid injury, the 
battery must not be used as a power source for other 
devices.

Use the battery in surroundings where temperatures 
are between -10 

°

C and 40 

°

C.

Do not expose the battery to microwaves or high 
pressure.

Never clean the battery or the battery charger with 
water. See also instructions under the Maintenance 
heading.

Store the battery out of reach of children.

Protect the battery from rain and wet conditions.

Battery charger safety

Only use Chargers, Husqvarna QC, for charging the 
Husqvarna replacement batteries, BLi.

Regularly check that the battery charger connection 
wire is intact and that there are no cracks in it.

Never carry the battery charger using the cord and 
never pull out the plug by pulling the cord.

Keep all cables and extension leads away from water, 
oil and sharp edges. Make sure the cable is not 
jammed in doors, fences or the like. Otherwise it can 
cause the charger to become live. Inspect extensions 
cords periodically and replace if damaged.

Do not use:

a faulty or damaged battery charger or never use a 
faulty, damaged or deformed battery.

!

WARNING! Protect the battery from 
direct sunlight, heat or open flame. There 
is a risk the battery may explode if it is 
thrown into an open fire. There is a risk of 
burns and/or chemical burns.

!

WARNING! Avoid all skin contact with 
battery acid. Battery acid may cause skin 
irritation, burns or corrosive injuries. If 
you get acid in your eyes, do not rub but 
flush your eyes with plenty of water for at 
least 15 minutes. See a doctor. You must 
wash any exposed skin with copious 
amounts of water and soap in case of 
incidental contact.

!

WARNING! Never connect the battery 
terminal to keys, coins, screws or other 
metal as this may short-circuit the 
battery. Never insert objects into the 
battery's air vents.

Unused batteries must be kept away from 
metal objects such as nails, coins, 
jewellery. Do not try to disassemble or 
crush the battery

Li-ion

Li-ion

!

WARNING! Minimise the risk of electric 
shock or short circuit as follows:

Never insert any object into the charger’s 
cooling slots.

Do not try to dismantle the battery 
charger.

Never connect the charger terminals to 
metal objects as this can short circuit the 
battery charger.

Use approved and intact wall sockets.

!

WARNING! Do not use the battery 
charger close to corrosive or flammable 
materials. Do not cover the battery 
charger. Pull out the plug to the battery 
charger in the event of smoke or fire. 
Remember the risk of fire.

Li-ion

Li-ion

Summary of Contents for 536LiHD60X

























Reviews: