manualshive.com logo in svg

Husqvarna 520iRX, Operator'S Manual, Page: 14 / 36

Share
Download
Husqvarna 520iRX Operator'S Manual Download Page 14

examine or clean the cutting

equipment.

•

Use sturdy non-slip boots.

•

Use clothing made of a strong

fabric. Always use heavy,

long pants and long sleeves.

Do not use loose clothing that

can catch on twigs and

branches. Do not wear

jewelry, short pants, sandals

or go with bare feet. Put your

hair up safely above shoulder

level.

•

Keep first aid equipment

close at hand.

Cutting attachment

WARNING: Remove the

battery and make sure

that the cutting

attachment stops

completely before you

work on any part of the

cutting attachment.

WARNING: Use correct

cutting attachment. Only

use the cutting

attachment with the

guards we recommend,

refer to 

Accessories on

page 32

. Make sure

that the cutting

attachment is sharpened

correctly. A cutting

attachment that is not

sharpened correctly

increases the risk of

blade thrust.

WARNING: An

incorrectly sharpened or

damaged blade

increases the risk of

accidents. Keep the teeth

of the blade correctly

sharpened. Follow the

instructions and use the

recommended file gauge.

CAUTION: An incorrectly

set saw blade increases

the risk of jamming and

blade thrust. This can

damage the saw blade.

14

757 - 001 - 24.10.2018

Summary of Contents for 520iRX





































Reviews:

No comments