KEY
T
O SYMBOLS
2
–
English
Symbols
W
ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
•
Hearing protection
•
Approved eye protection
•
A breathing mask should be used
when there is a risk of dust. Wear
anti-vibraiton gloves to reduce the
risk of whitefinger disease.
Make sure that the inlet cover is in the
closed position or that the vacuum tube
is mounted on the blower. Never touch
the impeller unless the unit is off, the
impeller has stopped moving and the
spark plug is disconnected.
The blower can forcibly throw
objects that can bounce back.
This can result in serious eye
injuries if the recommended
safety equipment is not used.
The blower operator
must ensure that no
people or animals come
closer than 15 metres.
When several operators
are working at the same site a safety distance of at least
15 metres must be in effect.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Switch off the engine b
y moving the
throttle trigger to idle position and then
press the red STOP button until the
engine stops completely. Switch off the
engine before carrying out any checks
or maintenance.
Regular cleaning is required.
Visual check.
Refuelling.
Choke lever in ”open position”.
Choke lever in ”closed position”.
