background image

325S25     

GB-5

 5. For safe operation

1.  Protective headgear

2.  Protective goggles

3.  Protective mask

4.  Rubber boots

5.  Ear muffs

6.  Neck covering

7.  Protective clothing

8.  Rubber gloves

9.  Protective clothing

 IMPORTANT

Check and follow the local regulations as to sound 
level and hours of operations for the product.

PRECAUTIONS BEFORE SPRAYING

•  Make sure you have the correct protective clothing, 

headgear, rubber gloves and boots, a protective mask, 

goggles, a towel, protective cream, etc., to prevent 

chemicals from coming into contact with your skin or 

entering your lungs. When spraying, please wear this 

protective gear to prevent any risk of injury.

 

 

  

•  Please store chemicals in a locked storage box, locker, 

or other safe place out of the reach of children.

•  Carefully read the instructions for using the chemicals, 

and familiarize yourself with the level of toxicity, method 

of use, etc.

•  Please pay all due consideration to the area in which 

you will be spraying, to ensure that you do not pollute 

the water supply, rivers, lakes, ponds, etc., or cause 

any damage to residents, passers-by, livestock, etc.

•  Prepare yourself physically on the day before spraying, 

by for example cutting down on alcoholic beverages 

or late-night work.

Do not allow children, animals, etc., to enter the chemi-
cal spraying area.

•  Before spraying, please prepare fully by inspecting 

sprayer nozzles and checking for abnormalities such 

as loose screws or spray hose connections, fuel leaks, 

defective or broken fluid gaskets, or damage to the 

carrying band.

PRECAUTIONS WHEN TRANSPORTING CHEMICALS

•  When transporting chemicals, please handle with care 

to ensure that there is no spillage of chemicals from 

torn bags, broken bottles, or loose stoppers.

•  Do not carry chemicals in the same container as food.

PRECAUTIONS  WHEN  TRANSPORTING  THE 
SPRAYER

•  Do not transport the sprayer while it has chemicals or 

fuel in the tank, as these could leak out as a result of 

impact during transportation.

•  When transporting in a vehicle, please use a rope or 

similar to fix the sprayer firmly to the cargo trailer in 

an upright position. Please do not transport by bicycle 

or motorbike, as this is dangerous.

PRECAUTIONS CONCERNING FUEL

•  The engine of this product is fueled by “mixed gasoline” 

that includes highly combustible fuel. Do not refuel or 

store fuel containers where there is any risk of com-

bustion from incinerators, burners, bonfires, kitchen 

stoves, electric sparks, welding sparks, etc.

•  Smoking  while  spraying  or  refueling  is  dangerous. 

Please avoid this at all costs.

•  When refueling during use, always stop the engine and 

make sure there are no naked flames in the vicinity 

before refilling.

•  Any fuel spilt during refueling should be wiped off com-

pletely with a rag or similar before starting the engine.

•  After refueling, seal the fuel container, tightly close the 

fuel tank cap, and start the engine at least 3 meters 

away.

PRECAUTIONS WHEN REFILLING CHEMICALS

•  Before filling the tank with chemicals, please make sure 

that the spray lever is completely at rest.

•  After chemical refilling, firmly tighten the tank cap. If 

not fully tightened the cap may become loose during 

spraying,  with  the  risk  of  physical  exposure  to  the 

chemicals.

PRECAUTION WHEN STARTING THE ENGINE

•  Please keep children, animals, etc. well away when 

starting the engine and spraying.

PRECAUTIONS WHEN SPRAYING

•  Since protective clothing generally offers poor ventila-

tion and thus places stress on the body, there is a risk 

of contracting heatstroke or other illness when operat-

ing for long periods under high temperatures. Please 

avoid spraying on hot days, aiming instead for early 

morning and late afternoon times when temperatures 

are relatively cool and winds are low.

•  When starting work, please pay all due consideration 

to the spraying time, wind direction, etc., to ensure that 

no noise disturbance or chemical hazard is caused to 

nearby residents, passers-by, farm crops, and so on.

•  While spraying please hold the grip firmly at all times 

and be careful not to point the nozzle in the direction 

of people or animals.

Summary of Contents for 325S25













































Reviews: