background image

 

English

 

 – 9

 

SAFETY INSTRUCTIONS

 

Safety instructions when using the 
hedge trimmer

 

CAUTION! Please read the operator’s manual carefully and 
make sure you understand the instructions before using the 
machine.

 

Personal protection

 

Always wear boots and other equipment described under 
the heading Personal protective equipment.

Always wear working clothes and heavy-duty long 
trousers.

Never wear loose clothing or jewellery.

Make sure your hair does not hang below shoulder level.

 

Safety instructions regarding the 
surroundings

 

Never allow children to use the machine.

Ensure that no-one comes closer than 15 m while you are 
working.

Never allow anyone else to use the machine without first 
ensuring that they have understood the contents of the 
operator’s manual.

Never work from a ladder, stool or any other raised 
position that is not fully secured.

 

Safety instructions while working

 

Always ensure you have a safe and stable working 
position.

Always use both hands to hold the machine. Hold the 
machine at the side of your body.

Use your right hand to control the throttle setting.

Make sure that your hands and feet do not come near the 
cutting attachment when the engine is running.

When the engine is switched off, keep your hands and feet 
away from the cutting attachment until it has stopped 
completely.

Watch out for stumps of branches that can be thrown out 
during cutting.

Always lay the machine on the ground when you are not 
using it.

Do not cut too close to the ground. Stones and other 
objects can be thrown out.

Check the working area for foreign objects such as 
electricity cables, insects and animals, etc, or other 
objects that could damage the cutting attachment, such 
as metal items.

If any foreign object is hit or if vibrations occur stop the 
machine immediately. Disconnect the HT lead from the 
spark plug. Check that the machine is not damaged. 
Repair any damage.

If anything jams in the blades while you are working, 
switch off the engine and wait until it has stopped 
completely before cleaning the blades. Disconnect the HT 
lead from the spark plug.

!

 

WARNING! The machine can cause serious 
personal injury. Read the safety instructions 
carefully. Learn how to use the machine.

!

 

WARNING! Cutting tool. Do not touch the 
tool without first switching off the engine.

Summary of Contents for 324HDA55 X-series





















Reviews: