background image

 

2 – 

 

English

 

KEY TO  SYMBOLS

 

Symbols

 

WARNING! Clearing saws, brushcutters and 
trimmers can be dangerous! Careless or 
incorrect use can result in serious or fatal 
injury to the operator or others.

Please read the operator’s manual carefully 
and make sure you understand the 
instructions before using the machine.

Always wear:

A protective helmet where there is a risk 
of falling objects

Hearing protection

Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with 
applicable CE directives.

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, 
while working, that no persons or animals 
come closer than 15 metres.

Machines fitted with saw blades or grass 
blades can be thrown violently to the side 
when the blade comes into contact with a 
fixed object. The blade is capable of 
amputating an arm or leg. Always keep 
people and animals at least 15 metres from 
the machine.

Arrows which show limits for handle 
positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Only use non-metallic, flexible cutting 
attachments, i.e. trimmer heads with trimmer 
cord.

Only intended for trimmer heads.

 

Other symbols/decals on the machine refer to special 
certification requirements for certain markets.

 

Switch off the engine by moving the stop 
switch to the STOP position before carrying 
out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be 
used.

50FT

15 m

50FT

15 m

Summary of Contents for 323RJ Series





































Reviews: