English
– 17
WORKING TECHNIQUES
(325HE3,325HE4)
•
Loosen the knob on the shaft (clockwise).
•
Press the cutting unit against the hedge or some other
fi
rm surface until the required angle is set.
•
Turn the knob (anti-clockwise).
Transport position
(325HE4)
Once the work has been completed fold the cutting unit back
against the shaft to simplify transport and storage of the
hedge trimmer.
1
Turn off the engine.
2
Loosen the knob on the shaft (clockwise).
3
Grip the handle on the cutting unit and angle the cutting
unit upwards. At an angle of 90 degrees there is a stop
position. To pass the stop position, pull out the lock button.
4
Fold down the cutting unit against the shaft.
5
Turn the knob (anti-clockwise).
CAUTION!
When the stop position has been passed the
blades are blocked, do not try to cut with the cutting unit in this
position.
!
WARNING! Do not hold the cutting head
when you adjust the angle. The blades are
sharp and you could easily cut yourself.
Summary of Contents for 323HE3
Page 26: ... z R 5 z R 5 ...
Page 27: ......
