Husqvarna 320iL, Operator'S Manual, Page: 16 / 72

2. Use the power trigger to control the speed.
To operate the product
To trim the grass
• Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer
line into the grass.
To clear grass
1. Keep the trimmer head above the ground.
2. Tilt the trimmer head.
3. Cut with the end of the trimmer line around
objects in the work area.
CAUTION:
Cut grass. Other
objects that are hit by the trimmer
line, increases the wear on the
trimmer line.
To cut the grass
1. Make sure that the trimmer line is parallel to
the ground when you cut the grass.
2. Do not push the trimmer head to the ground.
This can cause damage to the product.
3. Move the product from side to side when you
cut grass. Use full speed.
To sweep the grass
The airflow from the rotating trimmer line can be
used to remove cut grass from an area.
1. Hold the trimmer head and the trimmer line
parallel to the ground and above the ground.
2. Apply full throttle.
3. Move the trimmer head from side to side and
sweep the grass.
WARNING:
Clean the trimmer head
cover each time you assemble new
trimmer line to prevent unbalance and
vibrations in the handles. Also do a
check of the other parts of the trimmer
head and clean it if necessary.
To extend the trimmer line
• When the trimmer line becomes short during
operation, tap the trimmer head on a hard, flat
surface to extend more trimmer line out. You
must operate the product at full speed to get
the best result.
16 1511 - 006 - 11.01.2022