Husqvarna 315, 320, Operator'S Manual

Page: 16 / 153

• For Automower
®
315X/430X/450X: The
satellite symbol is shown when the GPS-
supported navigation is activated. Symbol
(A) is shown when the symbol has made
contact with a sufficient number of GPS
satellites. Symbol (B) shows when the
product has not made contact with a
sufficient number of GPS satellites.
Symbol (A) blinks during the first days the
product is working, as it is collecting GPS
information about the installation.
A B
• The ECO symbol is displayed if the
product is set in
ECO mode
.
• The black clock symbol (A) is shown
when the product is not allowed to mow
due to a Schedule setting. If the product
is not allowed to mow due to
Weather
timer
, symbol (B) is shown. If the
operation mode
Override schedule
is
chosen, symbol (C) is shown.
A B C
• The battery status shows the remaining
battery charge. If the product is loading, a
flash is also shown over the battery
symbol (A). If the product is placed in the
charging station without charging, (B) is
shown.
A B
• The height adjustment setting is displayed
as a scale/numerical value.
• For Automower
®
Connect@Home (refer
to Automower
®
Connect@Home on page
20
): An icon for Bluetooth
®
wireless
communication will appear in the product
display when connection with your mobile
device has been established.
3.6 Keypad Automower
®
305/310/315/315X/420/430X/440/450X
The keypad consists of 6 groups of buttons:
• The START button is used to activate the
product. This is normally the last button to
be pushed before closing the hatch.
• The BACK and OK buttons are used to
navigate in the menu. The OK button is
also used to confirm settings.
• The arrow button are used to navigate in
the menu but also to make selections in
certain setting options.
• The MENU button is used to go to the
main menu.
• The PARK button is used to send the
product to the charging station.
• The number buttons are used to enter
settings, for example PIN code, time or
exit direction.
3.7 The indicator lamp Automower
®
305
The indicator lamp on the ON/OFF button is
an important status indicator:
•
The product is active if the indicator lamp
lights continuously.
• The product is in standby if the indicator
lamp flashes. This means that the
operator must push the ON/OFF button to
make the product active again.
• The product is disabled when the
indicator lamp is not lit.
16 - Installation 1418 - 002 -