manualshive.com logo in svg

Husqvarna 223L, Operator'S Manual

Share
Download
Husqvarna 223L Operator'S Manual Download Page 23

23 – 

English

FEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT

1151414-95   Rev. 1  2008-12-23

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper 
maintenance are not covered.

ADD -ON OR MODIFIED PARTS

Add-on or modified parts that are not exempted by CARB or 
EPA may not be used. The use of any non-exempted add-on 
or modified parts will be grounds for disallowing a warranty 
claim. Husqvarna Forest & Garden will not be liable to warrant 
failures of warranted parts caused by the use of a non-
exempted add-on or modified part.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and 
responsibilities, you should contact your nearest authorized 
servicing dealer or call Husqvarna Forest & Garden at 1-800-
487-5951 or visit www.usa.husqvarna.com.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs are provided through all 
Husqvarna Forest & Garden authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND 
REPAIR OF EMISSION-RELATED PARTS

Any replacement part may be used in the performance of any 
warranty maintenance or repairs and must be provided 
without charge to the owner. Such use will not reduce the 
warranty obligations of the manufacturer.

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required 
maintenance, as defined in the operator’s manual.

Summary of Contents for 223L





































Reviews:

No comments

Brands by name

Popular brands

Load more brands