Husqvarna 2014 TE 125 EU, Owner'S Manual

Page: 52 / 128

12 SERVICE WORK ON THE CHASSIS
50
C00572-12
–
Remove screws
3
. Take off the fender.
12.17 Installing the front fender
C00572-11
Main work
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
C00596-11
–
Position the brake line and wiring harness in the brake line guide.
–
Mount and tighten screws
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Connect plug-in connectors
3
of the turn signals.
Finishing work
–
Install the headlight mask with the headlight. ( p. 83)
–
Check the headlight setting. ( p. 84)
12.18 Removing the shock absorber
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 43)
–
Remove the right side cover. ( p. 55)
–
Remove the main silencer. ( p. 54)
L01669-10
Main work
–
Remove screw
1
.
–
Remove fitting
2
.
L01668-10
–
Press angle lever
3
toward the rear.
–
Press linkage lever
4
downward.