Husqvarna 2014 FC 250 EU, Owner'S Manual

Page: 56 / 100

11 SERVICE WORK ON THE CHASSIS
54
C00444-10
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws 1 .
–
Remove cover
2
with membrane
3
.
B01899-10
–
Fill bleeding syringe 4 with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 91)
–
Mount bleeding syringe
4
on bleeder screw
5
with a suitable hose piece.
–
On the clutch slave cylinder, only release bleeder screw 5 to the point where filling
is possible.
Info
Wash off overflowing or spilled brake fluid immediately with water.
Avoid contact between brake fluid and painted parts. Brake fluid attacks
paint.
Use only clean brake fluid from a sealed container.
C00445-10
–
Inject the liquid into the system until it escapes from openings
6
of the master
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Tighten the bleeder screw and remove the bleeding syringe with the hose.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.