1
a
2
2
1
2
3
3
4
5
6
SPECIFICATIONS - OPERATION - MAINTENANCE
EN - 20
TRANSMISSION OIL LEVEL CHECKING
A. Transmission oil level
Keeping the motorbike level and in a vertical position, check
the oil level through the inspection (1) window on the right
crankcase. Check if level (a) is about midway of the inspec-
tion porthole.
To fill up, remove the filler cap (2).
Note*:
Have this operation made with warmed-up
engine.
WARNING*: Be careful not to touch hot
engine oil
CHANGING TRANSMISSION/GEARBOX OIL
Remove the engine guard (1) by loosening the lower screws (2)
and the side screws (3).
NOTE
On reassembly, make sure the spacer (4) is
correctly positioned.
To change oil, unscrew the undersump cap (5), remove the cap
(6) and let the oil drain completely; then screw the cap back on
with its seal and pour fresh oil through the filler hole.
Use only the prescribed quantity and type of oil.
