manualshive.com logo in svg

Husqvarna 142 152RB, User Manual, Page: 25 / 32

Share
Download
Husqvarna 142 152RB User Manual Download Page 25

English

 – 25

TECHNICAL DATA

EC-declaration of conformity

(Applies to Europe only)

We, 

Husqvarna AB,

  SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the clearing saws 

Husqvarna 142RB and 

152RB

 with serial numbers dating from 2002 onwards (the year is clearly stated on the rating plate, followed by the serial number), 

comply with the requirements of the COUNCIL’S DIRECTIVE:

   - of June 22, 1998 ”relating to machinery” 

98/37/EC

, annex IIA.

   - of May 3, 1989 ”relating to electromagnetic compatibility” 

89/336/EEC

, and applicable supplements.

   - of May 8, 2000 ”relating to the noise emissions in the environment” 

2000/14/EC

. Conformity assessment according to Annex V.

For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: 

EN292-2, 

CISPR 12:1997, EN ISO 11806, ISO 14865, ISO 14740. 

Maruyama MFG Co, Inc 4-15 Uchikanda 3-Chome Chiyoda-Ku Tokyo 101-0047, Japan, has carried out voluntary type approval 
for Husqvarna AB.

Huskvarna January 3, 2002

Bo Andréasson, Development manager

Summary of Contents for 142 152RB

































Reviews:

No comments