Husqvarna 136 Instruction Manual Download Page 17

17

U.S. EPA / ENVIRONMENT CANADA

EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OB-
LIGATIONS: 
The U. S. Environmental
Protection Agency, Environment Canada
and HUSQVARNA are pleased to explain
the emissions control system warranty on
your year 2002--2004 small off--road engine.
HUSQVARNA must warrant the emission
control system on your small off--road engine
for the periods of time listed below provided
there has been no abuse, neglect, or improp-
er maintenance of your small off--road en-
gine. Your emission control system includes
parts such as the carburetor and the ignition
system. Where a warrantable condition ex-
ists, HUSQVARNA will repair your small off--
road engine at no cost to you. Expenses cov-
ered under warranty include diagnosis, parts
and labor. MANUFACTURER’SWARRAN-
TY COVERAGE: 
If any emissions related
part on your engine (as listed under Emis-
sions Control Warranty Parts List) is defec-
tive or a defect in the materials or workman-
ship of the engine causes the failure of such
an emission related part, the part will be re-
paired or replaced by HUSQVARNA. OWN-
ER’S WARRANTY RESPONSIBILITIES:
As the small off--road engine owner, you are
responsible for the performance of the re-
quired maintenance listed in your instruction
manual. HUSQVARNA recommends that
you retain all receipts covering maintenance
on your small off--road engine, but HUSQ-
VARNA cannot deny warranty solely for the
lack of receipts or for your failure to ensure
the performance of all scheduled mainte-
nance. As the small off--road engine owner,
you should be aware that HUSQVARNA
may deny you warranty coverage if your
small off--road engine or a part of it has failed
due to abuse, neglect, improper mainte-
nance, unapproved modifications, or the use
of parts not made or approved by the original
equipment manufacturer. You are responsi-
ble for presenting your small off--road engine
to a HUSQVARNA authorized repair center
as soon as a problem exists. Warranty re-
pairs should be completed in a reasonable
amount of time, not to exceed 30 days. If you
have any questions regarding your warranty
rights and responsibilities, you should con-
tact your nearest authorized service center
or call HUSQVARNA at 1--800--487--5962.
WARRANTY COMMENCEMENT DATE:
The warranty period begins on the date the
small

off--road

engine

is

purchased.

LENGTH OF COVERAGE: This warranty
shall be for a period of two years from the ini-
tial date of purchase. WHAT IS COVERED:

REPAIR OR REPLACEMENT OF PARTS.
Repair or replacement of any warranted part
will be performed at no charge to the owner
at an approved HUSQVARNA servicing
center. If you have any questions regarding
your warranty rights and responsibilities,
you should contact your nearest authorized
service center or call HUSQVARNA at
1--800--487--5962. WARRANTY PERIOD:
Any warranted part which is not scheduled
for replacement as required maintenance, or
which is scheduled only for regular inspec-
tion to the effect of “repair or replace as nec-
essary” shall be warranted for 2 years. Any
warranted part which is scheduled for re-
placement as required maintenance shall be
warranted for the period of time up to the first
scheduled replacement point for that part.
DIAGNOSIS: The owner shall not be
charged for diagnostic labor which leads to
the determination that a warrantedpart is de-
fective if the diagnostic work is performed at
an approved HUSQVARNA servicing cen-
ter.

CONSEQUENTIAL

DAMAGES:

HUSQVARNA may be liable for damages to
other engine components caused by the fail-
ure of a warranted part still under warranty.
WHAT IS NOT COVERED: All failures
caused by abuse, neglect, or improper main-
tenance are not covered. ADD--ON OR
MODIFIED PARTS: 
The use of add--on or
modified parts can be grounds for disallow-
ing a warranty claim. HUSQVARNA is not li-
able to cover failures of warranted parts
caused by the use of add--on or modified
parts. HOW TO FILE A CLAIM: If you have
any questions regarding your warranty
rights and responsibilities, you should con-
tact your nearest authorized service center
or call HUSQVARNA at 1--800--487--5962.
WHERE TO GET WARRANTY SERVICE:
Warranty services or repairs shall be pro-
vided at all HUSQVARNA service centers.
Call 1--800--487--5962. MAINTENANCE,
REPLACEMENT AND REPAIR OF EMIS-
SION RELATED PARTS: 
Any HUSQVAR-
NA approved replacement part used in the
performance of any warranty maintenance
or repair on emission related parts will be
provided without charge to the owner if the
part is under warranty. EMISSION CON-
TROL WARRANTY PARTS LIST: 
Carbure-
tor, Ignition System: Spark Plug (covered up
to maintenance schedule), Ignition Module.
MAINTENANCE STATEMENT: The owner
is responsible for the performance of all re-
quired maintenance as defined in the in-
struction manual.

Summary of Contents for 136



















Reviews: