Husqvarna 128DJ, Operator'S Manual, Page: 9 / 87

English---9 115476927 Rev. 2 5/15/12
GENERAL SAFETY PRECAUTIONS
Check the cutting attachment for damage
or cracks. A damaged cutting attachment
should always be replaced.
Sharpening grass cutters and
grass blades
S
See the cutting attachment packaging for
correct sharpening instructions. Sharpen
blades and cutters using a single--cut flat file.
S
Sharpen all edges equally to maintain the
balance of the blade.
WARNING:
Use of an incorrect
or damaged blade could result in
serious injury or death. Always
discard a blade that is bent,
twisted, cracked, broken or
damaged in any other way. Never
attempt to straighten a twisted
blade so that it can be reused.
Only use original blades of the
specified type.
Trimmer head
S
Only use the recommended cutting at-
tachments. See the section on “Technical
data”.
IMPORTANT!
Always ensure the trimmer line is wound
tightly and evenly around the drum, other-
wise the machine will generate harmful
vibration.
S
Smaller machines generally require small
trimmer heads and vice versa. This is be-
cause when clearing using trimmer line
the engine must throw out the trimmer
line radially from the trimmer head and
overcome the resistance of the grass
being cleared.
S
The length of the trimmer line is also im-
portant. A longer trimmer line requires
greater engine power than a shorter
trimmer line of the same diameter.
S
Make sure that the cutter on the trimmer
guard is intact. This is used to cut the
trimmer line to the correct length.
S
To increase the life of the trimmer line it
can be soaked in water for a couple of
days. This will make the line tougher so
that it lasts longer.