background image

5. Use the arrow buttons to set the time

format and then push the BACK button.

6. Use the arrow buttons to set the date

format and then push the BACK button.

3.10.10.2 To set the language
1. Do steps 1–3 in 

To get access to the menu

on page 20.

2. Use the arrow buttons and the OK button

to move through the menu structure 

Settings

> General > Language.

3. Use the arrow buttons to select language

and then push the BACK button.

3.10.10.3 To set the country
1. Do steps 1–3 in 

To get access to the menu

on page 20.

2. Use the arrow buttons and the OK button

to move through the menu structure 

Settings

> General > Country.

3. Use the arrow buttons to select country

and then push the BACK button.

3.10.10.4 To reset all user settings
1. Do steps 1–3 in 

To get access to the menu

on page 20.

2. Use the arrow buttons and the OK button

to move through the menu structure 

Settings

> General > Reset all user settings.

3. Use the right arrow button to select

Proceed with reset of all user settings?

4. Push the OK button to reset all the user

settings.

Note: 

Security level, PIN code, Loop signal,

Messages, Date & Time, Language and Country

settings are not reset.

3.10.10.5 The About menu
The 

About menu displays information about the

product, for example serial number and software

versions.

982 - 001 - 12.12.2018

Installation - 25

Summary of Contents for 115H





















































Reviews: