background image

 

English

 

 – 

 

7

 

GENERAL SAFETY PRECA

 

UTIONS

 

chain sa

 

w usage if possible. Your dealer, forestry school or 

your library can provide information about which training 
materials and courses are available.

 Work is constantly in progress to improve the design and 
technology - improvements that increase your safety and 
efficiency. Visit your dealer regularly to see whether you can 
benefit from new features that have been introduced.

 

P

 

ersonal protective equipment

 

 

Approved protective helmet

Hearing protection

Protective goggles or a visor

Gloves with saw protection

Trousers with saw protection

Boots with saw protection, steel toe-cap and non-slip sole

Always have a first aid kit nearby.

Fire Extinguisher and Shovel

Generally clothes should be close-fitting without restricting 
your freedom of movement.

 

Mac

 

hine

  

′′′′

 

s safety equipment

 

In this section the machine’

 

s safety features and their function 

are explained. For inspection and maintenance see 
instructions under the heading Checking, maintaining and 
servicing chain saw safety equipment. See instructions under 
the heading, What is what?, to find where these parts are 
located on your machine.

The life span of the machine can be reduced and the risk of 
accidents can increase if machine maintenance is not carried 
out correctly and if service and/or repairs are not carried out 
professionally. If you need further information please contact 
your nearest servicing dealer.

 

Chain brake and fr

 

ont hand guard

 

Y

 

our chain saw is equipped with a chain brake that is 

designed to stop the chain if you get a kickback. The chain 
brake reduces the risk of accidents, but only you can prevent 
them.

Take care when using your saw and make sure the kickback 
zone of the bar never touches any object.

The chain brake (A) can either be activated manually (by 
your left hand) or automatically by the inertia release 
mechanism.

The brake is applied when the front hand guard (B) is 
pushed forwards.

!

 

W

 

ARNING! Most chain saw accidents 

happen when the chain touches the 
operator. You must use approved personal 
protective equipment whenever you use the 
machine. Personal protective equipment 
cannot eliminate the risk of injury but it will 
reduce the degree of injury if an accident 
does happen. Ask your dealer for help in 
choosing the right equipment.

 

IMPOR

 

TANT! Sparks can come from the muffler, the bar 

and chain or other sources. Always have fire extinguishing 
tools available if you should need them. Help prevent forest 
fires.

!

 

W

 

ARNING! Never use a machine with 

defective safety components. Safety 
equipment must be inspected and 
maintained. See instructions under the 
heading Checking, maintaining and 
servicing chain saw safety equipment. If 
your machine does not pass all the checks, 
take the saw to a servicing dealer for repair.

B

B

A

Summary of Contents for 1151439-95









































Reviews: