Husqvarna Viking Scandinavia 200, User Manual

Page: 16 / 44

14
Functions and InfoDisplay
Reverse
REVERSE
is touched to sew in
reverse. When the button is
released, Scandinavia 200 sews
forwards. The longest reverse
stitch length is 3 mm.
For permanent reverse, touch
the button twice in quick
succession before starting to
sew. The reverse sewing is
indicated by an icon on the
InfoDisplay.
Scandinavia 200 sews in
reverse until you touch the
button again.
Stitch length
When you select a stitch, your
Scandinavia 200 automatically
sets the best stitch length.
The set length is visible on
the InfoDisplay above the
stitch length buttons. You can
change the stitch length by
touching either the (+) or (-)
button.
Stitch width
The stitch width is set in the
same manner as the stitch
length. The set width is visible
on the InfoDisplay above the
stitch width buttons. The width
can be adjusted between 0
and 6 mm. If straight stitch
is selected, the width button
is used to adjust the needle
position.
Stop
STOP
is used to conclude a
stitch. Your Scandinavia 200
fastens the thread and stops
automatically when a stitch
or stitch sequence has been
completed.
STOP
is cancelled
when you touch the button
again or by selecting a new
stitch. When
STOP
is active,
an icon is shown on the
InfoDisplay. The stop-function
can also be programmed.
Mirror image
You can mirror a stitch by
using the button , mirror
image side to side. You can
also mirror the width when
you wish to to change the
needle position from left to
right. The symbol will be
displayed.
The Functions Panel