32
Operating the machine
Main motor overload
If you are sewing on very heavy fabric or if the machine is
blocked when sewing, the main motor can get overloaded. The
pop-up message will close when the main motor and power
supply is secure.
The stitch cannot be programmed
This message is shown if you try to program or add a buttonhole,
bartack or taper stitch* or the sew on button stitch to a program.
All stitches in your sewing machine are programmable except for
these. Close the pop-up message by pressing the OK button.
The stitch cannot be saved
This message is shown if you try to save a buttonhole, bartack,
darning or taper stitch* or the sew on button stitch to My
Stitches. All stitches in your machine can be saved in My Stitches
except for these. Close the pop-up message by pressing the OK
button.
Program too long to add more stitches
If you try to add more than 40 stitches or letters in the same
program this message is shown. Close the pop-up message by
pressing the OK button.
NOTE:
If you add a FIX, STOP or a Selective Thread
Cut* to the program these will each use one memory
space in the program.
The combination of commands is incorrect
If you are programming stitches or letters and try to insert any of
the commands STOP, FIX or Selective Thread Cut* into a stitch
program in an order that is not allowed, this message will appear.
Close the pop-up message by pressing the OK button.
Commands removed from program
If you try to insert a previously saved program into a new one or
if you are using the mirroring end to end function* on the whole
program, the result may be that the commands are put in an order
that is not allowed. To avoid this, the commands will be removed
from the program. Close the pop-up message by pressing the OK
button.
*Only on 870 Quilt
Summary of Contents for Sapphire 830
Page 1: ...User s Guide ...
