–3–
❈
❈
❈
➁
➀
OFF
ON
OFF
ON
1-3. Connecting Foot Control and Power Cord
Connect the foot control
c
and power cord
d
.
Before plug in your machine, be sure that the
voltage is same as that of your machine.
(indicated on the plate on the back of the
machine).
❈
Specifications vary from country to country.
1-4. Setting Telescopic Thread Stand
Extend the telescopic thread stand to its full
height, then turn until it locks against the stop.
Turn on the power and the light switch.
Always turn off the switch and unplug the machine
when not in use; changing needles, presser foot,
or needle plate; or servicing/cleaning the machine.
The harder you press the foot control, the faster
the machine runs.
When the power switch is turned off, the machine
will not operate even with pressure on the foot
control.
❈
Electronic foot control (for USA/Canada only)
This foot control gives full penetration power
even at slow speed for all sewing needs.
❈
Electronic type of
foot control
(for USA/Canada
only)