Husky HSK140HD Owner'S Manual & Warranty Information Download Page 3

3

• Recharges from North American Standard household outlet.

• Separate ON/OFF switches for spotlight and area light.

• Comfortable folding, locking, 90

°

 pistol grip.

• Flat area stand provides stability on tabletops and other flat surfaces.

NOTE:

 This unit is shipped in a partially charged state. Initially charge unit using the AC

     charger for 15 hours. Charge after each use.

2. OPERATION

Two switches (Spotlight and Area Light) control On/Off operation of both lights. The SpotLight

can be continuously lit for up to 25 minutes on a full battery charge. The Area Light can be lit for

up to 15 hours on a full battery charge. Figure 1 shows locations of  the handle, handle release

button and flat area stand. Figure 2 rear view, shows Spotlight/Off/Area light switch and

area light.

The handle rotates ninety degrees and locks in two different positions. The handle is released

from either locked position by pressing on the Handle Lock Button (located near two handle

screws) and rotating the handle to the new position.  When the handle is close to the body of

the light (folded) the spotlight is carried with the weight of the unit below the handle. When the

handle is rotated to be perpendicular to the body of the unit, the unit is carried pistol style with

the unit’s weight on top.  It is your choice of operating positions, depending on your needs

and comfort.

FIGURE 3

FIGURE 4

3. RECHARGING

AC and DC Recharge requires use of either

of these supplied recharge adapters.

Do not charge spotlight using any other adapters.

(see figure 5)
DURING AC RECHARGE/OR DC RECHARGE:
a) Never turn on while charging.

b) After recharge – disconnect cord and wait 5 minutes before use.

AC RECHARGING
ADAPTER

FOLDED HANDLE

HANDLE
RELEASE
BUTTON

WORK STAND

HOUSING
SCREWS

FIGURE 1

FIGURE 2

AREA LIGHT

AREA LIGHT
SPOTLIGHT SWITCH

RECHARGE PORT

RUBBER BEZEL

DC RECHARGING

ADAPTER

FIGURE 5

90

°

 SWIVEL

HANDLE

AREA
LIGHT

HANDLE AFTER
ROTATING 90

°

RECHARGING
PORT

Summary of Contents for HSK140HD









Reviews: