7
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Pre-Installation
PLANNING INSTALLATION
WARNING:
Disconnect, tag, and lock out the power source
before attempting to install or relocate the compressor.
IMPORTANT:
This compressor is not intended for outdoor
installation.
It is extremely important to install the compressor in a clean, well ventilated area where the surrounding air temperature will not be more
than 100°F. Provide a minimum clearance of 18 in. between the compressor fl ywheel or fan and the wall, and ensure clear access to the
drain valve to facilitate condensate drainage. Do not locate the compressor air inlet near steam, paint spray, sandblast areas, or any other
source of contamination.
TOOLS REQUIRED
Claw hammer
Safety goggles
Phillips
screwdriver
Flat blade
screwdriver
Measuring
tape
Adjustable
wrenches (2)
Ratchet,
1/4 in. and
9/16 in. socket
Pipe wrench
Hammer drill
and masonry
bit
Voltage meter
Work gloves
HARDWARE REQUIRED
NOTE:
Hardware not shown to actual size.
Concrete wedge
anchors
Vibration isolation
set (3 metal plates
and 6 rubber pads)
e
Strain relief
