Assembly
Mounting
the Pegboard to
1. Place the right support post (F) on the back of the mobile
Attach the right support post (F) to the back of the mobile
Attach the left pegboard panel (A) to the left support post (E)
6
A.
6
WARNING
:
Use special care to not over-tighten any of the
but do not tighten at this time.
Insert the middle pegboard panel (C) to the left pegboard (A)
Husky Mobile Workbench
screws to avoid damage to the pegboard or mobile workbench.
workbench. Ensure the support post is flush and level.
workbench using four screws (BB).
3.
using four screws (BB). Secure the pegboard to the post,
4.
and push it to the deepest position.
F
E
Repeat step 1 for left support post (E) .
2.
Attach the right pegboard panel (B) to the right support post (F)
but do not tighten at this time.
5.
using four screws (BB). Secure the pegboard to the post,
E
BB
A
BB
F
B
C
A
Pull the middle pegboard panel (C) back to middle position.
6.
