BEFORE USING FOR THE FIRST TIME
• For good circulation, the vents must not be blocked. Allow 100mm
clear space all round the unit for adequate ventilation. Your Husky
Wine Cooler should be placed on flat and firm surface for quieter
operation. If the appliance is to be placed on carpet, support it with
a wooden board underneath. Be aware that placing the appliance on
carpet may cause the carpet to fade.
• Do not expose the appliance to direct sunlight or a heat source such
as ovens, radiators, heaters, etc.
• Do not under any circumstances place heated beverages or food in
your Husky Wine Cooler.
• Do not open the door more often than necessary to lessen the
escape of cold air.
• For better air circulation, do not overfill the unit.
• Adjust the temperature regulator according to the amount of product
and the ambient temperature.
BASIC OPERATION
• Temperature range for your wine cooler: 5-18°C
Setting the temperature controller
Your Husky Wine Cooler is fitted with an automatic control panel lock that
activates 12 seconds after the last time a button has been touched. To unlock
the panel press the LOCk/THERMOMETER button 1 for three seconds. You
will hear a ‘beep’. The panel is now active for 12 seconds.
You can display the temperature in either Celsius or Fahrenheit by pressing
the LOCk/THERMOMETER button 1 for one second. REMEMBER: you will
need to unlock the control panel first (see above).
When the control panel is active, you may adjust the temperature by pressing
1. LOCk/THERMOMETER
2. INTERIOR LIGHT & DISPLAY ON/OFF
3. INTERNAL TEMPERATURE DISPLAY
4. INCREASE SET TEMPERATURE
5. DECREASE SET TEMPERATURE
4
H U S k Y R E F L E C T I O N S W I N E C O O L E R
1
2
3
4
5
