background image

 

4

 

Features

 

BOOSTER CABLES POWER SWITCH: Heavy-duty rotary switch turns power off to booster cables when not in use.  
Power can be turned on by turning the rotary switch in the clockwise direction.

 

POWER STATUS & CHARGE INDICATOR:  
Red LED = Battery charging  
Amber LED = Battery charged at mid-level  
Green LED = Battery is fully charged

 

HAND GENERATOR: Manually charges device battery in remote areas.

 

HAND GENERATOR CHARGE INDICATOR: LED indicator illuminates when battery is being charged (blinking).

 

CONVENIENT CHARGE CORDS: 120 Volt AC charger for in home use & 12 Volt DC charger for on the road use.

 

12 VOLT DC POWER OUTLET WITH OVERLOAD PROTECTION: Provides power to most 12 Volt DC accessories equipped with a  
12 Volt DC accessory plug. Device circuit is protect with an auto-reset overload circuit breaker and a replaceable 15A fuse  
on front panel. 

 

HEAVY-DUTY BOOSTER CLAMPS: 200 AMP rated color-coded battery clamps.

 

PROFESSIONAL QUALITY CABLES: Color-coded cables with extra-thick, oil-resistant, external-cable insulation sheathing.

 

BOOSTER CLAMPS STORAGE HOLDERS: Prevents accidental sparking when cables are not in use.

 

REVERSE BATTERY POLARITY DETECTION CIRCUITRY: Circuitry automatically activates if accidental reverse polarity clamp  
connection occurs. Red LED illuminates accompanied by a high pitch alarm.

 

BUILT-IN POWERFUL 150 PSI COMPRESSOR:

 

Compressor power switch.

 

Accurate air-pressure dial gauge with large and easy to read pressure increments in 

 (PSI) and 

 units.

 

Heavy-duty, high-pressure in

fl

ator rubber air-hose with an universal air valve stem quick-connector nozzle.

 

Nozzle adaptors for in

fl

atables.

 

Protected with a replaceable 15A fuse on front panel.

 

STANDARD 5 VOLT USB PORT: Switch-activated standard USB port for personal devices.

 

140 WATT POWER INVERTER: Switch-activated power inverter provides portable power to 120 Volt AC devices.

 

LED LIGHT: Provides long-lasting portable lighting with emergency 

fl

asher function.

Speci

fi

cations

Built-in battery

8-amp hour (Ah) sealed, lead-acid, maintenance-free, spill-proof, rechargeable

DC outlet

12 Volt DC (15A replaceable blade fuse) 

USB port

5 Volt DC / 2.1A

LED light

12 Volt DC / 330 mA

Power inverter

140 Watt

Air compressor

150 PSI (15A replaceable blade fuse)

Circuit breaker

Internal with Auto-reset (after 60 seconds)

Net weight

10.6 lbs.

Unit dimensions

9.14 in. ( h ) x 6.97 in. ( w ) x 12.2 in. ( d )

Storage temperature

(-4ºF - 140ºF) (-20ºC - 60ºC). Store in a cool, dry, well-ventilated area with overhead cover.

Operation temperature

(32ºF - 104ºF) (0ºC - 40ºC). Operate in a dry, well-ventilated area and place device on a leveled surface.

Summary of Contents for HD7481-B













Reviews: