5 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Care and Cleaning
INSPECTION
Maintain the product according to these instructions. You may not alter this product in any way.
1. Before using, inspect the jack thoroughly. Look for cracks in the welds, bent, damaged, loose, worn or
missing parts.
2. Inspect according to this manual ONLY.
3. If the jack has been subjected to abnormal load or shock (abuse), perform an immediate inspection. Take
the product to a local customer service representative for an authorized inspection before use.
Maintenance
Lubricating the jack
□
Use a good grade of lubricating oil on all
moving parts when needed.
Storing the jack
□
When the jack is not in use, or when storing
the jack, ALWAYS have the lifting arm in a full
down position.
□
Store the jack in a dry location and the handle
in a place where it will not be damaged.
RUST PREVENTION
Clean as needed and wipe down with an oil cloth.
Troubleshooting
Problem
Solution
Solution
The jack will not lower
completely.
□
The release valve is stuck.
□
Transfer the weight load.
The jack will not hold weight.
□
Check to see if any threads are
damaged.
□
Replace the jack.
The jack will not raise.
□
Check to see if any threads are
damaged.
□
Lubricate the moving parts.
□
Replace the jack.
□
Check to see if lubricating moving
parts helps.
The jack will not lift the load.
□
The weight is excessive.
□
Decrease the weight or change to
a higher capacity jack.
The lift arm will not lower.
□
Check to see if any threads are
damaged.
□
Replace the jack.