Modem
If your fex21 contains a modem, read these important notes before using it:
•
Connect the cable to the fex21 before connecting it to the network.
•
Where applicable, connect the cable so that the end closest to the ferrite
bead is attached to the fex21 unit.
•
Use only the supplied telephone cable, which incorporates a radio
interference suppresser.
•
Use only as instructed.
•
Do not connect to the telephone network if the unit is wet.
•
Do not attempt to open or modify the unit.
•
Refer to the fex21 label to establish which of the following set of regulatory
statements applies:
European Modem Only (CTR21)
The equipment has been approved in accordance with Council Decision
98/482/EC for pan-European single terminal connection to the public switched
telephone network (PSTN). However, due to differences between the individual
PSTNs provided in different countries, the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.
USA Modem Only (FCC part 68)
ANALOG DEVICE WARNINGS
This equipment complies with Part 68 of the Federal Communications
Commission (FCC) rules for the United States.
A label is located on the underside of the base unit containing the registration
number and Ringer Equivalence Number (REN). You must upon request
provide the following information to your local telephone company:
USOC Jack Type:
RJ-11
REN:
0.8
Should you experience trouble with this telephone equipment, please contact
WPI H
USKY
T
ECHNOLOGY
- contact addresses are listed on the back cover of this
booklet.