19 HUSKYTOOLS.com
Please contact 1-888-43-HUSKY for further assistance.
CHECKING THE OIL
WARNING:
Drain the tank to release air pressure before
removing the oil fill cap or oil drain plug.
CAUTION:
Overfilling with oil will cause premature air
compressor failure. Do not overfill.
□
The oil level should be to the middle of the sight
glass (3).
□
If needed remove the oil fill plug (1) and slowly
add oil until it reaches the middle of the sight
glass.
NOTE:
Use 30W compressor oil or a heavy duty SAE
30W, non-detergent, SF grade or better oil. Do not use
multi-weight automotive engine oils, as they will reduce
compressor life. Under extreme winter condition use SAE-10
weight oil.
CHANGING THE OIL
□
Remove the oil fill plug (1).
□
Remove the oil drain plug (2) and drain the oil
into a suitable container.
□
Replace the oil drain plug (2) and tighten
securely.
□
Slowly add compressor oil until it reaches the
middle of the sight glass (3).
NOTE:
Crankcase oil capacity is approximately 10.6 fluid
ounces (313,5 ml).
NOTE:
When filling the crankcase, the oil flows very slowly
into the pump. If the oil is added too quickly, it will overflow
and appear to be full.
□
Replace the oil fill plug (1) and tighten securely.
Maintenance (continued)
1
3
2
NOTICE
:
Risk of property damage. Use air compressor oil only.
Multi-weight automotive engine oils like 10W30 should not be use in
air compressors. They leave carbon deposits on critical components,
thus reducing performance and compressor life.
C302H_HUSKY_manual_5-15-ENG.indd 19
6/10/15 12:05 PM
