Audible alarm won't shut off...
1. Replace control panel.
System won't go into alarm mode...
1. Verify all wires are connected properly.
2. Confirm transformer is plugged in.
Audible alarm won't sound...
1. Confirm toggle switch is in "ON" position.
Strobe light won't stop flashing...
1. Replace control panel.
Bulk Product Sensor activates alarm prematurely... 1. Confirm float is in the correct position.
2. Confirm pipe is not over 10 ft / 3 m long.
Applications
Single or double walled above ground tanks.
Fluids
Test and warranty for oil, waste oil, diesel fuel, antifreeze, water and other fluids
with a low flash point
Milliamp load
750 mA maximum / 1000 mA maximum of optional accessories
Pipe
½" x 6" (12.7 mm x 152.4 mm) NPT PVC
Sensor
Buna
Shipping Weight
8 - 11 lbs / 3.6 - 4.9 kg (depends on length of Jarhead)
Thread
2" / 50.8 mm NPT
Case Quantity
5 - 10 (depends on length of Jarhead)
TROUBLESHOOTING GUIDE
WIRING CONNECTIONS
GENERAL TECHNICAL DATA
Husky Corporation • 2325 Husky Way • Pacific, MO 63069 • Phone: (800) 325-3558 • Fax: (636) 825-7300 • www.husky.com
Page 3
009310-7 7/2019
12VDC POWER IN
12VDC POWER IN
NC SENSOR IN
NC SENSOR IN
-
MUTED OUT ON ALARM
+
-
POWER OUT ON ALARM
+
TO SOLENOID VALVE
TO SOLENOID VALVE
Use 18-gauge / 2 conductor wire up to 150 ft. or
14 gauge / 2 conductor wire up to 350 ft. to connect all components.
