6
Installing the Chest onto the Workbench
2
□
Place the top chest (A) on top of the 72in. Mobile Workbench (sold separately) or other suitable workbench and align
the back to be flush.
□
Align the Bracket (B) over the threaded holes in the Chest (A) and mark the screw hole locations in the workbench.
CAUTION:
Do not over tighten the bolts.
Assembly
Model# H72MWC15DL Sku# 1003399495
Model# H72MWC15RDL Sku# 1003399496
Before installing this chest to another work surface, please refer to the Owner’s Manual for proper dimensions and loading
requirements.
The 72in. Tool Chest is designed to fit on the Husky Heavy Duty 72 in. 15-Drawer Mobile Workbench:
□
Attach the two brackets (B) over the holes at back of the product and secure each Bracket with 2 Bolts (AA) in the Chest
and 2 Screws (BB) in the workbench.
□
Using a power drill and 7/64 in. drill bit, carefully pre-drill the 2 holes per bracket in the workbench. Be CAREFUL to
only drill through the sheet metal and not into the contents of the workbench, with a maximum drill depth of 1/2 in.
□
□
1
Attaching Plastic Feet (Optional)
Insert the Plastic feet (C) into the 6 holes at the bottom the chest (A).
The Plastic feet (C) will help protect the surface of the workbench. There will be a small gap between the bottom of the
chest (A) and the surface of the workbench.
NOTE:
6 Plastic Feet are located in bag
found in top till.
71.6”
23”
23”
