Assembly
3
6
Installing the casters
□
□
□
□
Mount
the two
swivel
casters
with brake (E)
to
the bottom of
the tray (H) using
four
bolts
(BB)
per
caster
.
The
swivel
casters with
brake (E)
should be
installed
on the same side as the handle (C).
Mount
the two
rigid
casters (G)
to
the tray (H) using four bolts (BB)
per caster.
Tighten
all bolts (BB)
with
a 13 mm wrench
.
Carefully return
the tool cart
to
its
upright
position.
CAUTION
:
Do
not
over
tighten
the bolts
.
1
Installing the legs
2
H
E
BB
G
□
Place tray (H) on its side on top of the packaging material while
mounting casters to protect the product`s finish.
□
Mount
the four support legs (F) to the tray (H) using two
NOTE
:
Do not fully tighten bolts yet to allow for some
movement during cabinet installation.
Installing the cross supports
AA
AA
AA
F
D
K
M
screws (AA) per leg. Finger tighten only.
□
Attach the right cross support (D) as shown using two screws (AA).
□
Attach the front rail (K) to the legs as shown with two screws (AA).
Do not fully tighten screws at this time.
Do not fully tighten screws at this time.
□
Attach the left cross support (N) as shown using two screws (AA).
Do not fully tighten screws at this time.
N
□
Attach the pegboard (M) to the legs of the cart using six screws (AA).
Do not fully tighten screws at this time.
4
Installing the pegboard
NOTE
:
The pegboard is designed to attach to either
the left or right side of the tool cart, according to your
preference.
H
