7 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Maintenance (continued)
REPLACING HYDRAULIC JACK OIL TO THE JACK
1
Opening the release valve
□
Open the release valve by turning the handle
counterclockwise.
2
Removing the plug
□
Remove the oil fill plug.
3
Draining the old oil
□
Turn the entire jack over so that all of the old
oil will drain out of the oil fill hole.
OIL PAN
NOTE:
When draining oil, use a proper container and
always follow all local and state waste disposal guidelines.
4
Leveling the jack
□
After all of the old oil has drained out of the
jack, turn the jack back over to a level position.
5
Releasing pressurized air
□
Rapidly pump the jack handle 6 to 8 strokes to
release any pressurized air.
6
Filling with new oil
□
Using a good grade of SAE 5W hydraulic
jack oil, fill the reservoir to the bottom of the
threads in the oil fill hole. Replace and tighten
the oil fill plug. Do not allow dirt and debris to
enter the system.
