http://www.huskietools.com
2
9. If the cutters are used under water, wash them down and lubricate after each use. This whole operation takes
less than five minutes. It may be helpful to paint new tools with a light color, corrosion resistant paint.
10. Always return tools to their carrying bag to protect them from sand and dirt. Extra bags can be purchased.
11. Always carry a spare blade, preferably attached to the carrying bag.
12. Use clear hydraulic fluid MV-32 available from your dealer or HTI.
13. When cutting, keep area clear of spectators as hardened metals may fly apart when severed.
14. Always cut the material at a 90 degree angle to the blade. Any other angle may cause the blade and head
shear to fracture. See illustration below.
G E N E R A L I N F O R M AT I O N G U I D E F O R S P - 8 5 C U T T E R
