www.spartacogroup.com
800-860-6170
6
SPECIFICATIONS
REC-B658U
Features
• Interchangeable Cutter Head
• Rapid Advance
• One Hand Operation
• Tested Up to 75kV
• Rotational Head
• Bright White, LED Lights for Working in Low
Light Conditions
• Ergonomically Designed for Balance and Grip
• Weather Resistant Housing
• Audible Bypass when Predetermined Pressure
is Achieved
• 5 Year Warranty on Tool, Battery & Charger
The
REC-658U
was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and
C-Taps. The rapid advance feature allows the operator quicker compression cycles. In addition to the rapid advance feature, it
also has incorporated an electronic counter that will allow a service technician to read the number of compression cycles the tool
has made. Also, the new tool housing has been reinforced to improve durability during heavy field use.
A factory pre-set bypass cartridge assures a six ton compression every time. The REC-658U accepts either “W”or “O” type
dies. The D3 nest die comes standard with the tool. Always consult your connector manufacturer for proper die/connector
combinations. The REC-658U will accept the optional 25CAT cutter head attachment. Quick release pins allow the operator to
change between compression and cutter head in one minute with no springs or pins to lose.
Specifications
Output
6 Ton
Weight
8.2 lbs. with Battery
Size
14.3”L x 10”H x 3.1”W
Jaw Opening
1.8”
Connector Range
Lugs and Splices
#8-500 MCM Cu
#8-300 MCM Al
H-Taps
Up to 4/0-4/0
Optional Accessories
25 CAT
Cutter Head
HT58CUT
Cutter Die
Crimping Estimates
BP-84
#6 Cu/Al
250
1/0 Cu/Al
195
4/0 Cu/Al
150
The new 6 series battery operated tools with “B” designation are Bluetooth enabled products.
These tools are able to communicate data to your Bluetooth enabled PC via the downloadable software available on Spartaco
website.
In addition to the audible beeps and visual Led indicators on these tools identifying battery connection, full compression cy-
cles, proper achieved pressure, and incomplete crimps, the tools also record data to be viewed later via the Bluetooth connec-
tion at you PC.
The data includes locked fields for model and serial number of the tool connected. It has cycle count data, and it has fields for
read / write capabilities for the user to enter notes such as truck or job number, repair history, or any note the user or mainte-
nance technician may feel important to record.
Complete operation instructions as well as the downloadable computer software is available at: www.spartacogroup.com