www.spartacogroup.com
800-860-6170
5
SPECIFICATIONS & KIT INCLUDES
• 1 Compression Head
• 1 Carrying Case
• Protective Rubber Boot on “C” Head
Specifications
Output
12 Ton
Weight
8.2 lbs.
Size
10”L
Jaw Opening
1”
Connector Range
Lugs
#8 - 750 MCM Cu
Splices
#10 - 400 MCM Cu
Features
The
EP-410H
is a traditional C-head with a one-inch jaw opening. It will accept all “U” type
dies currently used in 12 ton tools on today’s market. A 10,000 psi external pump is required to
operate the C-head. The output pressure is 12 tons when the pump is set at 10,000 psi. After a
compression is made on a lug or sleeve, an internal ram spring retracts the jaw when the pump
pressure is relieved. The tool is supplied with a standard 3/8” male, screw type coupler but can
be fitted with an opposite female coupler if requested. Carrying case included. When using any
of these high-pressure tools, always use 10,000 psi rated non-conductive hose (NC-16 series).
