www.huskietools.com
6
1. Select an appropriate size of die for the connector. Insert half of the dies into the jaw by pressing
the push pins. When the push pins are released, they will return to their original position and hold
the die in place. Attach the other half of the die in the same manner.
2. Place the connector between the dies press the trigger and advance the ram so that the connector
is held between the dies and insert conductor into the terminal.
3. Press the trigger until the compression is completed. A clicking sound will be heard while crimping
and will stop once the crimp is completed.
4. Press the release button to retract the ram. The ram continues to retract while the release button
is pressed. The ram stops when it reaches the lower end.
OPERATING INSTRUCTIONS
COMPRESSION
