HUSABERG FE 450 AUS, Repair Manual

Page: 56 / 285

05/EXHAUST
54
8.1
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
100443-10
–
Disconnect spring

.
–
Remove screws

and take off the main silencer.
8.2
Installing the main silencer
100443-11
–
Mount the main silencer. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Reconnect spring

.
8.3
Removing the exhaust system
–
Remove the main silencer. ( p. 54)
–
Remove the shock absorber. ( p. 34)
–
Take off the throttle valve body and allow it to hang to the side. ( p. 161)
300676-10
–
Disconnect connector

of the lambda sensor. Open the cable binders.
300677-10
–
Remove screw

.
–
Unscrew screw

.