19
9. Maintenance and service
The equipment is subject to very high mechanical stresses. A visual inspection is to be
carried out after every use: however, at least one visual inspection is to be carried out
annually. These inspections enable the early detection of wear and tear, which means that
punctual replacement of the wearing parts prevents breakages from occurring. A function
test is also to be carried out every three years or should there be any doubt regarding the
safety or reliability of the equipment.
(Please also observe the relevant valid national and international regulations pertaining to
service intervals of rescue equipment)
CAUTION!
Clean off any dirt before actuating the equipment!
WARNING / CAUTION!
In order to carry out maintenance and repair works, tools appropriate for the job
and personal protective equipment are essential.
9.1 Spreader, overall
Inspections to be carried out:
Visual inspection
Spreader
• Opening width of the spreader arms on the tips (see chapter “Technical data”),
• General tightness (leaks),
• Operability of the star grip,
• Existence and stability of handle,
• Labels completely existent and legible,
• Covers in perfect condition,
• Couplings must be easy to couple,
• Dust protection caps must be available.
Spreader arms
• Spreader arms free of cracks and without any chipped spots or deformations on the surfaces,
• Bolts and retaining rings of the spreader arms must be present and in correct working order,
• Grooving of the tips must be clean and squared, and not have any tears
• Tips existent and locked
Hoses (also refer to separate manual for the hydraulic hoses)
• Visual check for visible damage,
• Check for leaks.
