Step 7:
First, hang the fan head on the bracket.
Then, fasten using No.1 screw, No.3 spring
washer, No.4 and No. 5 hexangular nut.
Finally, fix No.2 screw or adjusting the tilt
angle of fan head.
OPERATING INSTRUCTIONS
CAUTION:
Make sure control is in the “0” (off) position.
1. Connect power plug to any standard 120V AC outlet.
2. The fan comes with two different speeds. Pull power chain once to operate the low speed
and allow to operate for 10 seconds. Once 10 seconds have passed, you may now pull the
power chain to the high position.
PARTS DIAGRAM
PARTS LIST
3
2
1
4
5
5
