21
English
English
Juice cap
Juice cap
Juice cap seal
When the squeezing screw stops during the operation
1. Press [REV] button for about 3-5
seconds and release it. Repeat
this 2-3 times.
Note:
[REV] is the
button that reverses the rotation
direction of the squeezing
screw. This causes ingredients
to move upwards. [REV] button
only works while pressing and
holding the button down the
rotation of the squeezing screw
stops immediately if the button
is released.
2. Press [ON] button to operate
after reverse operation is
completely stopped.
Note:
When changing direction of
the screw rotation from [ON]
or [REV] make sure that the
squeezing screw has stopped
rotating completely before
changing direction.
Important
If the squeezing screw is unmovable after following the directions above and still
doesn’t work, please unplug the power cord and disassemble chamber set, and
clean it and try again.
Caution when using operation button
Note:
In case of reversing during operation, press [REV] button shortly, then press
[REV] button again for operation. With the feature of the product, even though
you stop the operation, it doesn’t stop right away. It rotates slowly then stops. If
the rotation stops completely, you may press the button to any direction you want.
(Same as when pressing [ON] during reverse operation).
<ON>
<REV>
<STOP>
<REV>
<ON>
<ON>
<REV>
<STOP>
<REV>
<ON>