HUROM M100 Series, Instruction Manual

Page: 16 / 21

15 11. How to Clean Blender
How to use [CLEANING] Mode
01 Pour water into the container insomuch that the
blades are submerged.
02 Place the container on the product body and
then assemble the container cover and auxiliary
cover (measuring cup) correctly.
03 Turn the jog dial to select the [CLEANING] menu
in Auto Mode and then press the [START/STOP]
button to wash.
※ Do not remove the container until the blades
stop rotating completely and the jog dial returns
to the stop position. Turn off the power, detach the
plug and then disassemble the container.
01 Pull out the power cord to turn off the power.
Wipe the product body with a damp towel or soft
sponge. Be careful not to soak the product body in
water or let water get into it.
02 Separate the container cover and auxiliary cover
to wash them.
Wash and dry them before assembling.
03 Gently rinse the inside of the container with
water. Be careful not to let water get into the bottom
of the container that touches the product body. Do
not soak the container in water. It may create rust
or affect the product’s performance.
※
In case foreign matters fail to be removed from
the blades after washing, do not place your hand
into the container but, instead, use a cleaning tool
such as a cleaning brush to wash off the foreign
matters.
※
Blades cannot be detached from the container.
Do not detach them and watch out for safety.
※
Do not place any of the parts into a dishwasher.