Version September 2022
EN
11
HÜRNER HST 300 Manual USB 2.0 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
structions has to be respected. Note that for that time the
pipe fitting joint which is still warm must not be subjected
to an external force.
6
Downloading the Reports
Interface
USB A Interface Port
for connecting USB mass storage media (such as a
memory stick)
The interface port complies with the USB version 2.0
specification (i.e., maximum data rate of 480 megabits
per second).
Important
Before transferring data, it is highly recommended
to switch the welding unit off and on again. If this
fails to happens, there is a risk of data transfer
failure, or reports in the welding unit may be cor-
rupted.
Important
When transferring welding reports to a USB stick,
always be sure to wait until the display shows the
“Download finished” message before you discon-
nect the USB stick from the product. If you discon-
nect it too early, the unit may ask you whether you
want to delete the reports in memory, although
they were not properly transferred. In this case,
if you delete the contents of the report memory,
the welding reports would be irrevocably lost and
would not be available elsewhere either.
6.1 Selecting the File Format
Connecting the storage media causes the the screen to
appear in which the format of the output file with the
welding reports can be selected: a PDF file with an ab-
stracted or extended version of the report, the format of
the welding data management application DataWork or
a CSV file. Using the
ñ
and
ò
arrow keys, select the file
type you need and confirm your selection by pressing the
START/SET key.
The CSV format enables import of the report data into
a database or spreadsheet application, provided this ap-
plication can read the format; this is the case, e.g., with
Microsoft Excel.
The Service Report option is not important for normal
Display 6
* Select File Type *
DataWork File
>PDF Abstract
PDF Ext'd Report
