Hurco winmax, Programming Manual

Page: 43 / 254

WinMax Lathe NC Programming
704-0115-307
Overview
1-23
Renumbering and Tagging Menu
Renumbering and tagging menu offers access to renumbering and tagging functionality.
This menu can be accessed by selecting More

from the Basic programming menu.
Figure 1–9. ISNC Renumbering and Tagging Menu
The menu contains the following softkeys:
• Block Renumbering Mode—invokes Block Renumbering Mode submenu.
See Block Renumbering Submenu, on page 1 - 24.
• Tag Block—tags a block by underlining it. There is no limit on the amount of
tagged blocks you can have.
• Jump to Previous Tagged Block—NC editor tries to find the closest tagged
block before the current cursor's position. If such block is found, the cursor is
placed in the beginning of the block.
• Jump to Next Tagged Block—NC editor tries to find the closest tagged
block after the current cursor's position. If such block is found, the cursor is
placed in the beginning of the block.
• Tagged Block List—invokes Tagged Blocks List screen, which allows the
user to review the tagged block and manage the tags. See NC Tag List, on
page 1 - 25.
• More

—invokes Program Execution menu.
• Exit Editor—exits the NC Editor and moves to the Input screen. Select Part
Programming to return to the NC Editor screen.